1. Station: Blanking and Deep-drawing

-> Video for modem connection

-> Video for broadband connection

The tin plate strip is unwound, its surface coated with a thin film of lubricant and the strip continuously conveyed to the deep-drawing press.

At first a blank is cut out at each individual tool of the press; the drawing ram then presses this blank through the draw ring to form a cup. The tool is made up of 9 to 10 individual tools which are arranged next to each other and behind each other.

1. Blanking and Deep-drawing 2. Wall-ironing and end forming 3. Trimming 4. Washing 5. Outside coating 6. Printing 7. Drying 8. Initial internal coating	9. Necking in 10. Flanging 11. End coating 12. Second internal coating 13. Testing for holes and flange cracks 14. Testing for internal defects 15. Palleting